Results 1 to 4 of 4

Thread: Audio Processing in DE1

  1. #1
    Join Date
    Feb 2010
    Posts
    4
    Rep Power
    1

    Default Audio Processing in DE1

    Hi,

    I want to capture input from the line in input on the board and convert it to digital for processing on FPGA without Nios II.
    The examples on the CD weren't helpful. i2sound example bypasses the line in and mic inputs and directs them to line out.
    I couldn't figure out how to configure the audio codec to capture the analog input and convert it to digital and send it to dac again to play the audio.
    I am assuming that I need to use the slave mode operation. I wonder how I can see the captured input on a register in FPGA.
    Any help will be appreciated!

    Thanks in advance

  2. #2
    Join Date
    Dec 2007
    Location
    Bochum Germany
    Posts
    5,855
    Rep Power
    1

    Default Re: Audio Processing in DE1

    I don't see a clear preference for master or slave mode, both can work. The i2c_sound demonstration runs the Codec in master mode, but as you said, it's not processing the data or clock at all, just performs an ADC to DAC loopback.

    To record or sendout data, you need shift registers, clocked by BCLK and captured/loaded on LRC (frame clock) edges. Unfortunately, no demonstration is provided for this basically simple process.

  3. #3
    Join Date
    Feb 2010
    Posts
    4
    Rep Power
    1

    Default Re: Audio Processing in DE1

    Thanks for your kind reply.

    So, according to what I understand, my data input to the shift register is going to be AUD_ADCDAT and after I process the signal, I will send the data to AUD_DACDAT bit by bit at every LRC edge.

    Is this correct?

  4. #4
    Join Date
    Feb 2010
    Posts
    1
    Rep Power
    1

    Default Re: Audio Processing in DE1

    đkm I am VietNam

Similar Threads

  1. Cyclone II starter dev kit,DE1, Audio HELP!
    By cycloneII in forum University Program
    Replies: 1
    Last Post: October 1st, 2012, 11:08 AM
  2. Image Processing with DE1
    By rcastilloec in forum General Altera Discussion
    Replies: 4
    Last Post: June 20th, 2010, 01:15 PM
  3. DE1 audio codec
    By chema15 in forum General Altera Discussion
    Replies: 3
    Last Post: December 1st, 2009, 07:47 PM
  4. NEED HELP in audio signal processing
    By sk1989 in forum Development Kit Related
    Replies: 7
    Last Post: August 19th, 2009, 06:01 AM
  5. Image processing
    By Sunny in forum Development Kit Related
    Replies: 1
    Last Post: August 1st, 2007, 05:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •