Results 1 to 4 of 4

Thread: BeMicro (Cyclone III version) Windows 64 driver

  1. #1
    Join Date
    Nov 2010
    Posts
    2
    Rep Power
    1

    Default BeMicro (Cyclone III version) Windows 64 driver

    Hi all,

    I'm a new FAE with Arrow, and in attempting to get BeMicro installed on my Windows 7-64 bit machine, I've noticed a lot of people having issues with this.

    One of our FAEs in Europe worked with Hitex to create a Windows 64 compatible driver. I've confirmed that it works, and I can talk to the BeMicro without jumping through any hoops.

    The new DLL should also not cause a conflict with the USB blaster driver, but I have not had the opportunity to confirm that yet.

    Attached is the install file. It's an exe that I added the .zip extension to in order to allow it to upload to Altera forums.

    Cheers.
    Attached Files Attached Files

  2. #2
    Join Date
    Aug 2005
    Location
    California
    Posts
    4,562
    Rep Power
    1

    Default Re: BeMicro (Cyclone III version) Windows 64 driver

    Are you sure you just added the .zip extension? I had to run unzip to get Win7 64-bit to recognize the file.

    I can confirm that this driver works with the BeMicro under Win64.

    Thanks!

    Cheers,
    Dave

  3. #3
    Join Date
    Nov 2010
    Posts
    2
    Rep Power
    1

    Default Re: BeMicro (Cyclone III version) Windows 64 driver

    Sorry, you're right Dave. Thanks for verifying!

  4. #4
    Join Date
    May 2010
    Location
    New Hampshire
    Posts
    7
    Rep Power
    1

    Default Re: BeMicro (Cyclone III version) Windows 64 driver

    I just loaded the attached driver from Ilsie on my laptop with Windows 7 (64bit) and my BeMicro is now recognized.

Similar Threads

  1. BeMicro error on Windows 7
    By brian in forum Quartus II and EDA Tools Discussion
    Replies: 6
    Last Post: June 19th, 2013, 06:34 AM
  2. bemicro windows 7 64bit programmer
    By aw1231 in forum Development Kit Related
    Replies: 3
    Last Post: February 26th, 2012, 11:45 PM
  3. Bemicro hardware component does not meet candidate driver
    By CalvinDay in forum Development Kit Related
    Replies: 1
    Last Post: January 25th, 2012, 06:09 AM
  4. Note: Windows version updated on August 9, 2010.?
    By strongleg in forum Quartus II and EDA Tools Discussion
    Replies: 2
    Last Post: August 27th, 2010, 07:41 AM
  5. bemicro and windows 7 64bits
    By monnoliv in forum Development Kit Related
    Replies: 0
    Last Post: August 6th, 2010, 11:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •