I'm attempting to use an Ubuntu 14.04 virtual private server to build the kernel, distro, and bootloader.

When I try to install the 16.0 EDS I get an error because it is looking for xterm or a gnome-term. I don't need/have graphics. How can I install the toolchain without the DS5 IDE?

Also, I'm a little confused. I'm assuming the baremetal tools are for the bootloaders. Which toolchain is used for Linux userspace code?

Thanks,

Kenny

Launch DS-5 installation [Y/n]:


Info: Failed to run ds-5 Installer, no xterm or gnome-terminal found.
Press [Enter] to continue:


Error: Error running xterm -e
'/opt/altera/16.0/embedded/ds-5_installer/install.sh --destination
/opt/altera/16.0/embedded/ds-5': /bin/sh: 1: xterm: not found
Press [Enter] to continue:
Info: The baremetal toolchain link was not created. You need to run
/opt/altera/16.0/embedded/host_tools/altera/ds5_link/ds5_link from the embedded
command shell after installing DS-5 to create the baremetal toolchain link.
Press [Enter] to continue:
Vulture:
Vulture:
Vulture:
Vulture: ls /opt/altera/16.0/
embedded/ licenses/ logs/ qprogrammer/ uninstall/
Vulture: ls /opt/altera/16.0/
embedded/ licenses/ logs/ qprogrammer/ uninstall/
Vulture: ls /opt/altera/16.0/embedded/
ds-5_installer/ examples/
embedded_command_shell.sh host_tools/
embeddedsw/ ip/
env.sh version.txt
Vulture: ls /opt/altera/16.0/embedded/embedded_command_shell.sh
/opt/altera/16.0/embedded/embedded_command_shell.sh
Vulture: /opt/altera/16.0/embedded/embedded_command_shell.sh
WARNING: DS-5 install not detected. SoC EDS may not function correctly without a
DS-5 install.