Results 1 to 3 of 3

Thread: Just got development board, need help installing..

  1. #1
    Join Date
    Apr 2017
    Posts
    34
    Rep Power
    1

    Default Just got development board, need help installing..

    Hi guys. I just received my Intel 'Max10 50 Development Kit' (rev C). I have Quartus Prime 17.1 installed and running.

    I want to install the 'Development Kit installer', however, I have run into an apparent problem,
    and would appreciate some help before I proceed, to be sure I don't break something.

    I have downloaded and unzipped the 'full installation for rev C' from here:
    https://www.altera.com/products/boar...html#rel_links

    The instructions indicate to 'run' the installer, yet I see no .exe in the package I have downloaded and unzipped.
    "Full installation of all files, including designs, GUI, user manual, BOM, layout, PCB, schematics, and other documents or files.
    FOR Rev C PCB KITS ONLY"



    Here are the Instructions I refer to:

    1. Download the MAX 10 Development Kit installer from the MAX 10 FPGA Development Kit page of the Altera website. Alternatively, you can request a development kit DVD from the Altera Kit Installations DVD Request Form page of the Altera website.

    2. Run the MAX 10 FPGA Development Kit installer.

    3. Follow the on-screen instructions to complete the installation process. Be sure that the installation directory you choose is in the same relative location to the Quartus II software installation. The installation program creates the development kit directory structure shown in the following figure.

    Am I interpreting these instructions wrong or missing something obvious? Did I simply miss spotting the .exe? Sorry, this will be my first Development board with Intel/Altera. Thanks so much for your help. Cheers,

  2. #2
    Join Date
    May 2013
    Posts
    794
    Rep Power
    1

    Default Re: Just got development board, need help installing..

    There's no installer. Just go into the Examples directory and then into board_test_system.

  3. #3
    Join Date
    Apr 2017
    Posts
    34
    Rep Power
    1

    Default Re: Just got development board, need help installing..

    Quote Originally Posted by sstrell View Post
    There's no installer. Just go into the Examples directory and then into board_test_system.
    Ahhh. Thank you, sstrell. Perhaps the documentation hasn't been updated.

Similar Threads

  1. Installing OpenCL RTE on Cyclone V board
    By ptorru in forum OpenCL
    Replies: 5
    Last Post: December 14th, 2016, 07:34 AM
  2. Installing an operating system on the altera DE1 sockit board
    By rukawa in forum General Altera Discussion
    Replies: 0
    Last Post: June 18th, 2014, 01:52 AM
  3. do altera produce 100Gb/s fiber port on board or development board?
    By martinboy in forum General Altera Discussion
    Replies: 3
    Last Post: March 21st, 2013, 08:10 PM
  4. How to get DE2i (NOT DE2) development board or similar board?
    By Alexei Shcherbakov in forum Development Kit Related
    Replies: 1
    Last Post: February 6th, 2013, 11:22 AM
  5. specifications of external clock signal DE2 Board and Starter Development Board
    By mrkel in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 2
    Last Post: November 27th, 2012, 05:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •