Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: HSMC Specification

  1. #11
    Join Date
    Nov 2008
    Posts
    2
    Rep Power
    1

    Default Re: HSMC Specification

    Hopefully, I got this right. This message is for Fall. You mentioned sometime back that you have the eagle footprint for the HSMC connectors. Could I get that from you. Building these looks painful.
    Thanks,
    Greg
    gregstepro@yahoo.com

  2. #12
    Join Date
    Aug 2009
    Posts
    3
    Rep Power
    1

    Exclamation HSMC eagle footprint

    Quote Originally Posted by fall View Post
    (If somebody is interested in an EAGLE footprint for this connector, let me know.)
    Hello fall!
    Yes, I would be interested in the eagle-footprint! Could you somehow send it to me? Please contact me!
    Thanks,
    Maekja

  3. #13
    Join Date
    Aug 2009
    Posts
    2
    Rep Power
    1

    Default Re: HSMC eagle footprint

    Quote Originally Posted by Maekja View Post
    Hello fall!
    Yes, I would be interested in the eagle-footprint! Could you somehow send it to me? Please contact me!
    Thanks,
    Maekja
    Hi fall! I would also be very interested in this eagle footprint!! Thanks a lot for contacting me: michael@magictimelapse.ch

  4. #14
    Join Date
    Mar 2009
    Posts
    18
    Rep Power
    1

    Default Re: HSMC Specification

    Hi, fall,

    I am also interested in this eagle footprint. Would you
    please send it to GXL2y@yahoo.com?

    Thanks very much,

    Kevin
    Last edited by gl888; September 16th, 2009 at 09:35 AM.

  5. #15
    Join Date
    Aug 2009
    Posts
    2
    Rep Power
    1

    Default Re: HSMC Specification

    Quote Originally Posted by gl888 View Post
    Hi, fall,

    I am also interested in this eagle footprint. Would you
    please send it to GXL2y@yahoo.com?

    Also, a starter's question:
    I may need to build a test board with HSMC connector.
    What's the best way to have the HSMC connector
    mounted on the test board? (I may use expressPCB, so the
    board will has no component on it) Is it possible to
    mount it by myself?

    Thanks very much,

    Kevin

    The easiest way is to use the pin out board: http://www.bitec.ltd.uk/hsmc_proto.html

  6. #16
    Join Date
    Mar 2009
    Posts
    18
    Rep Power
    1

    Default Re: HSMC Specification

    Michael79,

    Thanks for suggestion.

    I will take your idea. My approach will be a little bit different:
    a board from TERASIC
    https://www.terasic.com.tw/cgi-bin/p...nguage=English & No=322
    it cost $55 a piece, $35 for shipping from Taiwan.

    Best,


    gl888

  7. #17
    Join Date
    Mar 2010
    Posts
    1
    Rep Power
    1

    Default Re: HSMC Specification

    Quote Originally Posted by PoeticLicense View Post
    Greg--It was actually the user named "fall" who offered to make the Eagle footprints available. I've got them in Orcad, if that would help let me know. Otherwise I'm afraid you'll have to rely on fall...
    Hello PoeticLicense,
    I would love the footprints in Orcad for the asp-122952-01 HSMC connector.
    Thanks so much for any assistance.
    cordellkelley@msn.com
    -Kelley
    Last edited by cordellkelley; March 5th, 2010 at 09:17 AM. Reason: add email

  8. #18
    Join Date
    Sep 2008
    Location
    California, USA
    Posts
    30
    Rep Power
    1

    Default Re: HSMC Specification

    FYI, the HSMC spec is available on the altera website now:

    http://www.altera.com/literature/ds/hsmc_spec.pdf

  9. #19
    Join Date
    May 2010
    Posts
    1
    Rep Power
    1

    Default Re: HSMC Specification

    Hi Fall,

    Can you please send me the Eagle footprints for Samtec Connector (ASP-122952-01)? My email is pearl.ke.cao@gmail.com. Thank you very much!

  10. #20
    Join Date
    Jun 2010
    Posts
    1
    Rep Power
    1

    Default Re: HSMC Specification

    Quote Originally Posted by fall View Post
    I already have the Samtec Connector (ASP-122952-01) because i want to build an expansion board for the Cyclone III Development Kit. (If somebody is interested in an EAGLE footprint for this connector, let me know.)



    The pinout/signal names for the HSMC connector is the point i'm interested in! Your proposal was the correct location: In the document "CycloneIII_SB_3C25.pdf" on page 11 you can find the HSMC connector.

    Thanks!

    Is there anyway you could send me that footprint? It would be a huge help!
    I'm at paulorecc@gmail.com

Similar Threads

  1. connecting 2 dev kits via HSMC-HSMC?
    By briane in forum Development Kit Related
    Replies: 6
    Last Post: July 21st, 2010, 09:25 AM
  2. JTAG configuration protocol specification
    By eliben in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 10
    Last Post: October 24th, 2008, 06:16 AM
  3. Target Board specification?
    By Mike DeSimone in forum General Discussion Forum
    Replies: 5
    Last Post: August 3rd, 2004, 01:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •