Results 1 to 7 of 7

Thread: Footprint for UBGA 324 pin package

  1. #1
    Join Date
    Jul 2017
    Location
    San Jose, Ca
    Posts
    17
    Rep Power
    1

    Default Footprint for UBGA 324 pin package

    I am looking for the recommended PCB footprint for the UBGA 324 pin package as used on the MAX 10 10M16DCU324I7G part.

    I have found drawings and even Cadence Allegro .dra files for just about every other package, except that one.

    can anyone point me at the proper document for this?

    Thanks

    Rod

  2. #2
    Join Date
    Sep 2011
    Posts
    14
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    Hi Rod,

    Based on my understanding, Altera will provide the OrCAD symbol in .OLB. The OrCAD symbol can be downloaded from Table 2 of the following link:
    https://www.altera.com/support/suppo...b-cadence.html

    Thank you

  3. #3
    Join Date
    Jul 2017
    Location
    San Jose, Ca
    Posts
    17
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    The Orcad .olb files are the schematic symbol. I need the recommended PCB footprint.

    Following that same link there is a download link for the file "device_family_footprints.zip" but it does NOT contain the UBGA 324 package. I don't actually want a .dra file anyway as the footprints we use must be made with our own padstacks. All I really need is a drawing. This information is usually included in a datasheet but I can't find it in this case

  4. #4
    Join Date
    Sep 2011
    Posts
    14
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    Hi,

    From my understand, Altera no longer update the PCB Footprint Libraries for Cadence Allegro PCB Tools. We will only provide the OrCAD symbol in .OLB.
    The PCB footprint libraries which can be downloaded from Table 1 is applicable for the mature devices.
    https://www.altera.com/support/suppo...b-cadence.html

  5. #5
    Join Date
    Jul 2017
    Location
    San Jose, Ca
    Posts
    17
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    Like I said before, I don't want the actual allegro file. I want a drawing that specifies what the pattern is.

    This drawing must exist. I don't understand why it is so hard to find.

  6. #6
    Join Date
    Jun 2009
    Posts
    235
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    Have you looked on the website under "packages"?

  7. #7
    Join Date
    Jun 2012
    Posts
    8
    Rep Power
    1

    Default Re: Footprint for UBGA 324 pin package

    Hi,

    You can find the package drawing in the link given below
    https://www.altera.com/content/dam/a...4r00474-02.pdf
    For this particular package they haven't given .dra files but you can create the footprint based the given package details.

    Best regards,
    --Ashok
    ----If it is useful accept it is a solution

Similar Threads

  1. Replies: 5
    Last Post: October 18th, 2016, 12:21 PM
  2. Recommended pads for UBGA-169
    By noam_tz in forum General Altera Discussion
    Replies: 2
    Last Post: July 20th, 2016, 04:35 AM
  3. Mismatch CycloneV (5CSEBA5U19) package with PCB Footprint. How to solve it?
    By rtheelen in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 2
    Last Post: April 11th, 2016, 05:08 AM
  4. What is the Package Material of RQFP package
    By Prasath in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 1
    Last Post: January 16th, 2014, 08:37 AM
  5. PCB footprint for Cyclone III
    By jr9910 in forum General Altera Discussion
    Replies: 1
    Last Post: April 18th, 2011, 08:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •