Results 1 to 4 of 4

Thread: DE10-Lite not recognized in Quartus Prime 17.02

  1. #1
    Join Date
    Nov 2017
    Posts
    2
    Rep Power
    1

    Default DE10-Lite not recognized in Quartus Prime 17.02

    I have installed device driver for Altera USB-Blaster. Windows 7 device manager is showing "Altera USB-Blaster" in USB devices but the device is not shown in Tools->Programmer. I have added the device (10M40DCF484) manually using Add Device option. But when I open the SignalTap II Logic Analyzer, I get "No device is selected" in JTAG Chain Configuration. Scan Chain option does not do any action (as seen in the scanned image).
    Thank you very much for your help.
    Attached Images Attached Images

  2. #2
    Join Date
    May 2013
    Posts
    483
    Rep Power
    1

    Default Re: DE10-Lite not recognized in Quartus Prime 17.02

    Click the Setup button to select the USB Blaster hardware.

  3. #3
    Join Date
    Nov 2017
    Posts
    47
    Rep Power
    1

    Default Re: DE10-Lite not recognized in Quartus Prime 17.02

    [FONT=Times New Roman]Hi Zubair,

    1. Have you turned on the hardware/ development Board?
    • You can add device in programmer without turning on the board.
    • You can see USB blaster available in device manager without turning on the board by just connecting the USB blaster to the PC.
    • But signal tap we can't add like that, it will automatically detect or by setup option.

    2. Have you loaded any .sof/.pof ?

    Best Regards,
    Anand Raj Shankar
    (This message was posted on behalf of Intel Corporation)
    [
    /FONT]

  4. #4
    Join Date
    Nov 2017
    Posts
    2
    Rep Power
    1

    Default Re: DE10-Lite not recognized in Quartus Prime 17.02

    Thanks sstrell and Anand for your replies. None of the suggested items worked. I have found the cause of this issue to be a conflict between Altera USB Blaster device driver and another USB to JTAG device driver from TI board that I am using to interface with the DE-10 Lite board. Apparently both use FTDI chip. Fortunately, the TI board I am using also supports a second JTAG interface via Blackhawk v2 System Trace debugger that does not conflict with the Altera device driver.

    Zubair

Similar Threads

  1. Quartus Prime Lite Edition Clock
    By gamzecabadag in forum General Altera Discussion
    Replies: 4
    Last Post: August 24th, 2017, 10:13 AM
  2. Quartus Prime Lite OpenCL Licensing
    By mespadoto in forum OpenCL
    Replies: 9
    Last Post: July 3rd, 2017, 04:19 AM
  3. (very) novice question of Quartus Prime Lite
    By NewbieFPGA in forum Quartus II and EDA Tools Discussion
    Replies: 3
    Last Post: May 19th, 2017, 12:14 PM
  4. Quartus Prime Lite limitaions
    By Balasubrahmanya in forum Quartus II and EDA Tools Discussion
    Replies: 4
    Last Post: February 27th, 2017, 12:30 PM
  5. 30-day evaluation license with Quartus Prime Lite 16.0 ??
    By GiuseppeScollo in forum General Altera Discussion
    Replies: 4
    Last Post: September 28th, 2016, 04:11 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •