Results 1 to 7 of 7

Thread: Quartus Prime FIR 2 IP tool initial error

  1. #1
    Join Date
    Mar 2018
    Posts
    4
    Rep Power
    1

    Default Quartus Prime FIR 2 IP tool initial error

    Hello,
    I am trying to design a system on De0 Nano board using Quartus Prime. I am trying to add a fir filter in my desing. Thats why i want to use FIR 2 tool. But when i try to add that tool, i get some errors at the begining. I posted the screenshot of the errors in the attachments. I cant find any solutions.

    Best regards,
    Recep Onur YILDIZ
    Attached Images Attached Images

  2. #2
    Join Date
    Nov 2017
    Posts
    428
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hi,

    Can you elaborate on steps followed by you?
    Which version of tool you are using?

    Best Regards,
    Anand Raj Shankar
    (This message was posted on behalf of Intel Corporation)

  3. #3
    Join Date
    Mar 2018
    Posts
    4
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hello,

    I open a new project on Quarus Prime. The info about Quartus Prime is in the pic attached. After openning the project, i add new schematic file in the menu which shows in the attachments. Save it that schematic file. At the end, i try to add FIR2 filter from IP catalog menu. After that i got that errors. I also attached the FIR2 Documentation pic.

    Best regards,

    Recep Onur
    info.JPGfir2 doc.JPGip catalog.JPG

  4. #4
    Join Date
    Nov 2017
    Posts
    428
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hi,

    I was not able to recreate the error.
    Check which device you are selected for FIR II IP.
    Only ArriaII GX, Arria II GZ, Arria V, Arria 10, Cyclone IV, Cyclone V, MAX 10 FPGA, Stratix IV GT, Stratix IV GX/E & Stratix V device support the FIR II IP core.

    Best Regards,
    Anand Raj Shankar
    (This message was posted on behalf of Intel Corporation)FIR GENRATION.jpgFIRgenii.jpg

  5. #5
    Join Date
    Mar 2018
    Posts
    4
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hi,

    I use De0 Nano board. Actually, i designed a filter using same board and Quartus 2. Thats why i dont think the reason of the errors isnt the board. Still, i changed the device and try to use FIR II tool. But i get the same errors.

    Best regards,

    Recep Onur

  6. #6
    Join Date
    Nov 2017
    Posts
    428
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hi,

    To which device you have changed?
    Try to create the new project with device required instead of changing in the previous design? With which you will come to know whether FIR II IP is supported on device or not.

    Best Regards,
    Anand Raj Shankar
    (This message was posted on behalf of Intel Corporation)

  7. #7
    Join Date
    Mar 2018
    Posts
    4
    Rep Power
    1

    Default Re: Quartus Prime FIR 2 IP tool initial error

    Hi Anand,

    As you said, i created a new project and choose Aria II GX. But still i get the same error. By the way, i realized that when i use the Platform Designer with my De0 Nano boards, i can add FIR II filter without no error.

    Best Regards,
    Recep Onur Yıldız
    Last edited by rorroror; March 19th, 2018 at 11:04 PM.

Similar Threads

  1. Quartus Prime Pro 16.1 - EDA Tool Options not showing up in Tools -> Options...
    By ap29 in forum Quartus II and EDA Tools Discussion
    Replies: 3
    Last Post: March 22nd, 2018, 07:36 AM
  2. Quartus Prime Lite: Error in WHEN conditional
    By kirchnerandre in forum VHDL
    Replies: 3
    Last Post: March 8th, 2018, 10:29 AM
  3. Timing Simulation error in Quartus prime 16.1
    By rohitn in forum General Altera Discussion
    Replies: 1
    Last Post: December 4th, 2017, 11:18 PM
  4. Replies: 0
    Last Post: August 17th, 2016, 01:51 AM
  5. "initial" to initial register array in quartus
    By novemer in forum Quartus II and EDA Tools Discussion
    Replies: 2
    Last Post: December 14th, 2010, 06:07 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •