Results 1 to 2 of 2

Thread: DDR DQS BANKS 5/6 MAX10 Conflict

  1. #1
    Join Date
    May 2018
    Posts
    3
    Rep Power
    1

    Default DDR DQS BANKS 5/6 MAX10 Conflict

    In the MAX10M16 the two banks that support DDR memory are bank 5/6.
    The DQS lines for banks 6 is on pins H11/H12.
    The DQS lines for banks 5 is on pins L15/K15.

    If i assign the DQS/DQ on bank 6 (pins H11/H12)
    I get an error that says:
    Error (171082): Can't place node "mem_dqs[0]" in location or region "PIN L15" -- location is not compatible with current location of PIN H11 for the node -- location added due to User Location Constraints and IO standards pin placement

    If i assign the DQS/DQ on bank 5 (pins L15/K15)
    I get an error that says:
    Error (171082): Can't place node "mem_dqs[0]" in location or region "PIN H11" -- location is not compatible with current location of PIN L15 for the node -- location added due to User Location Constraints and IO standards pin placement

    ... so i am stuck. What bank should i put my DQS/DQ pins on?

    Is there something i need to do to the DQS pins that are not used?

  2. #2
    Join Date
    May 2013
    Posts
    853
    Rep Power
    1

    Default Re: DDR DQS BANKS 5/6 MAX10 Conflict

    I don't understand. You're putting DQS on pin L15 and the error you get is about pin H11? And vice versa?

    If you haven't already, in the Pin Planner, go to the View menu and enable the DQ/DQS pin view. That way you can guarantee you are using the optimized and correct pins.

Similar Threads

  1. MAX10 - Can we power up IO banks separately at different times for power sequencing?
    By km191919 in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 2
    Last Post: February 10th, 2018, 02:33 AM
  2. max speed for banks (MAX10)
    By jerome_h in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 1
    Last Post: September 19th, 2016, 07:01 AM
  3. Pin assignment conflict with Stratix II GX
    By JWillsUT in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 5
    Last Post: October 27th, 2011, 05:40 AM
  4. Cygwin conflict
    By TracyTThomas in forum General Software Forum
    Replies: 0
    Last Post: July 14th, 2005, 01:04 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •