Results 1 to 2 of 2

Thread: Power sequencing for Cyclone10GX device

  1. #1
    Join Date
    May 2016
    Posts
    5
    Rep Power
    1

    Default Power sequencing for Cyclone10GX device

    We are planning to use Cyclone10 GX device.(10CX220YF780).
    We read in its development board guide that it requires some power sequencing.
    Kindly suggest some integrated power supply for our device similar to Analog devices ADP5050 for cyclone5 or any other make.
    And how critical is power sequencing for this device??

  2. #2
    Join Date
    Nov 2017
    Posts
    558
    Rep Power
    1

    Default Re: Power sequencing for Cyclone10GX device

    Hi,

    Quote Originally Posted by rajeshgulati View Post
    And how critical is power sequencing for this device??
    If the POR monitored power supplied (from Table:3 page:5 https://www.altera.com/en_US/pdfs/li...e/an/an692.pdf) does not reached and stay the appropriate voltage level, the nSTATUS will be low. You will face configuration issues like .sof not loading and so on.

    Check Enpirion device for power supplies from below link.
    https://www.altera.com/products/power/devices.html

    Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

    Best Regards,
    Anand Raj Shankar
    (This message was posted on behalf of Intel Corporation)

Similar Threads

  1. CYCLONE10GX SERDES clock
    By lichjr in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 0
    Last Post: June 13th, 2018, 12:40 AM
  2. MAX10 - Can we power up IO banks separately at different times for power sequencing?
    By km191919 in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 2
    Last Post: February 10th, 2018, 02:33 AM
  3. HPS power is being analyzed for a device with an HPS without HPS power
    By flz47655 in forum Quartus II and EDA Tools Discussion
    Replies: 4
    Last Post: October 20th, 2015, 04:32 PM
  4. Cyclone IV IO bank power sequencing
    By a_x_h_75 in forum FPGA, Hardcopy, and CPLD Discussion
    Replies: 3
    Last Post: September 6th, 2013, 07:49 AM
  5. Power Sequencing for Arria II GX devices
    By Lifegoeson in forum General Altera Discussion
    Replies: 1
    Last Post: March 18th, 2013, 07:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •