Results 1 to 2 of 2

Thread: PLL of Cyclone V: 'reconfig_to_pll' bus description needed

  1. #1
    Join Date
    Jun 2017
    Posts
    1
    Rep Power
    1

    Question PLL of Cyclone V: 'reconfig_to_pll' bus description needed

    Hi community,

    I'm working on a Project that has to be migrated from a Cyclone III to a Cyclone V FPGA.
    My problem is the PLL reconfiguration. Normally, the reconfiguration is processed by use of the PLL reconfiguration megafunction.
    In my application, I can't use this tool. For the Cyclone III, we've created a own simple design to handle the scan chain. This was possible, because the scan chain is well documented.
    Unfortunately, the PLL reconfiguration on the Cyclone V is completly different (it uses a 64Bit reconfiguration bus), and my problem is, that I could not find any description of the bus signals nor the bus timing.

    My question is: Can anybody give me a hint, where to find this information? Or has anybody a description of the bus?

    Thanks

    Find attached a screenshot that illustrates my question
    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2013
    Location
    London
    Posts
    1,547
    Rep Power
    1

    Default Re: PLL of Cyclone V: 'reconfig_to_pll' bus description needed

    Altera/Intel don't publish the details of that bus.

    Can I ask why you don't want to use the PLL_RECONFIGURE IP - as is intended for PLL reconfiguration? You're clearly intending to do some redesign work in moving to Cyclone V from Cyclone III. Why not incorporate the PLL_RECONFIGURE IP and use the two bits of IP as intended? Controlling the PLL_RECONFIGURE IP is pretty straightforward...

    Cheers,
    Alex

Similar Threads

  1. BeMicro (non-SDK, Cyclone III) Lab Material needed
    By lkw-peter in forum Development Kit Related
    Replies: 4
    Last Post: August 27th, 2017, 05:32 AM
  2. Cyclone V GX Dev Kit needed
    By kocht in forum Development Kit Related
    Replies: 2
    Last Post: June 9th, 2014, 11:48 PM
  3. 3.3 V Output needed from Cyclone III Starter Kit
    By makontrack in forum Development Kit Related
    Replies: 6
    Last Post: May 5th, 2010, 05:11 AM
  4. Cyclone PS Configuration help needed
    By joeks in forum General Altera Discussion
    Replies: 1
    Last Post: November 2nd, 2009, 07:41 AM
  5. cyclone III: LCD Help needed
    By bukola86 in forum Development Kit Related
    Replies: 2
    Last Post: August 15th, 2009, 04:20 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •